Yesterday, I shot P60G2 using the Orange (1.4) atomizing head at 2:1 ratio. Results were pretty good. I have more priming to do today and have seen where others have used the 1.3 ( green). The 3M rep recommended the clear ( 1.8) , but I presume he may have been following the P60 1:1.5 recommendation.
On the ribs, I had some minor splatter, using 1 turn on the fan from the closed position and 4.5 on the flow, I suspect this may have been improper gun angle.
This is my first time shooting the P60 using the Accuspray system, and I?m curious to know if there is a better combination. Thanks. Jt
On the ribs, I had some minor splatter, using 1 turn on the fan from the closed position and 4.5 on the flow, I suspect this may have been improper gun angle.
This is my first time shooting the P60 using the Accuspray system, and I?m curious to know if there is a better combination. Thanks. Jt