climberrn
Well Known Member
I successfully downloaded and installed the GTN software update on the extra card included in the GTN package. I also loaded the most recent map cycle on the same card. After the update on the GTN-625, every time I restarted the unit it came up in configuration mode as long as that card was inserted. I ended up bringing the other card home and loading the map cycle on that also. It works great with the other card inserted.
After loading the software update, is that card only to be used for software, or is there a way to remove the update files and make that a map only card?
I?m sure there is a simple answer. Just don?t want to delete the wrong files on the software loader card and ?brick? it.
After loading the software update, is that card only to be used for software, or is there a way to remove the update files and make that a map only card?
I?m sure there is a simple answer. Just don?t want to delete the wrong files on the software loader card and ?brick? it.