We are pleased to announce the release today of the new V11.80 software update for G3X non-touch systems using GDU 370/375 displays.
This free software upgrade can be downloaded to an SD card from this page and installed by the user.
This new software incorporates many of the features made available recently for G3X Touch systems:
The recently updated Rev. Q G3X Pilot Guide provides additional guidance on using these features.
Let us know if you have additional questions.
Thanks,
Steve
This free software upgrade can be downloaded to an SD card from this page and installed by the user.
This new software incorporates many of the features made available recently for G3X Touch systems:
- Added GMC 507 support. The GMC 307 autopilot mode controller is being replaced by the slightly more capable GMC 507 (same cost), and now this controller can be used with G3X, G3X Touch, and G5 systems.
- Added support for Flight Director GPS Track mode when using a GMC 507 with dedicated track mode button
- Added VNAV support for those using GTN 6XX/7XX navigators with V6.51 or newer software.
- Added GSU25C/25D support. The GSU 25/25B ADAHRS are being replaced with newer versions called the GSU 25C/25D with the same operational characteristics as the previous units.
- Resolved incorrect GPS date which occurs in some displays due to week rollover issue.
The recently updated Rev. Q G3X Pilot Guide provides additional guidance on using these features.
Let us know if you have additional questions.
Thanks,
Steve
Last edited: