Wings are just about done. Need to attach the fuel tanks and rivet the flaps together. Got the Fuse kit a littler earlier this time. With the wing kit I was without a project for a month and that just plain sucked. Lesson learned!
This box was quite the monster. The put the 1 long piece of angle in the box kind of sprung so it pushed against the side, and it ended up popping open the box side. Its bent a bit when you look at it down its length (8+ feet), but hoping thats not a big deal. Also wierd that there's only 1 big longeron, would think there would be two. We'll see what inventory says!
The bigger issue is the bent F-1076 bottom skin. Of course its the biggest skin in the whole box. I have an email into Barb to see what my options are. Since its on the bottom I don't mind an imperfection down there. But I really don't want it to crack 8 years into flying either.