Guy Prevost
Well Known Member
I?ve had the privilege of flying with a new in-the-ear headset for a few months. It was designed after years of frustration with the offerings from the two established in-ear headset manufacturers. The best part is that the CQ1 is manufactured and marketed within the VAF family; Tanya and Scott Card. I?m not sure what CQ stands for, but in my mind it?s Card Quality. Card Machine Works is now a paid advertiser on the site, headsets are now for sale, and I feel like I can out them. I get extremely energized by watching people identify problems and create solutions. It's even better when we all benefit from the results!
I?ve been flying with the CQ1 for a few months. The noise cancelling microphone makes a huge difference in the quality of communication and the speakers have the quality to match. Right after Christmas I made my first IMC approach into the LA area. it was such a relief to have consistent clear communication capability without having to mess with my headset. The kids in the back seat don?t comply with the sterile cockpit rule, so the headset mike has to do double duty filtering out airplane noise and kids excited about arriving at Disneyland. Communication with SoCal approach and the tower was never a problem.
The CQ1 is visually similar to some other offerings, but one touch or a closer inspection reveal the enormous differences. The differences are even more obvious at first use. The frame is more robust and stays where you put it. The cables are high quality with a Kevlar core. The controls are simply amazing! No more finding the tiny sweet spot in the volume knob that allows both speakers to work simultaneously! The mike is fundamental game changer with its noise cancelling capability. It stays EXACTLY where you put it with no spring back. There?s no auxiliary input, that feature is easily addressed by simple adapters and most intercoms and audio panels have wired and / or Bluetooth inputs anyway.
My fear is that this post reads like an advertisement. It?s not; I am however excited about the product and what its creators have done. I like it well enough that we have bought a second CQ1 for my pilot wife. I own two Bose A-20s because they?re quality, they fit the kids, and they will for years. I own a Lightspeed Zulu II which was an expensive failed experiment. Quality is good, but they interfere with sunglasses and hats, and they clamp my dainty ears; a fault they share with the Bose. I have primarily flown with the Quiet Technologies headset because it?s more comfortable than anything that clamps my head. It was also fickle, temperamental, and of mediocre quality. I have tested all 4 headsets back-to-back and Tanya and Scott?s CQ1 offering is the best, hands down.
I find in-the-ear headsets quieter than ANR in RVs, especially when glasses and hats are in the mix to break the seal with my head. I can hear the cancelling feature in ANR headsets and find it tiring and a bit nauseating. There was a post here recently about that, so I'm not the only one. Ear tips and ear plugs are a very personal thing. They also have to be inserted correctly to work. I roll my own using Howard Leight earplugs because they work well for me. I think Card Machine Works have a few other suggestions. I use the same basic plugs for flying, motorcycling, woodworking, machine work, and even at my day job at times. It?s on my list to make a video describing my process. Now that I?ve stated that publicly, maybe I?ll follow through.
Here's a link to their website. There is much more detailed information there. https://cqheadset.com/
Here's a photo:
Here's a photo of one on my ugly mug. I've since refined the positioning on my head.
I?ve been flying with the CQ1 for a few months. The noise cancelling microphone makes a huge difference in the quality of communication and the speakers have the quality to match. Right after Christmas I made my first IMC approach into the LA area. it was such a relief to have consistent clear communication capability without having to mess with my headset. The kids in the back seat don?t comply with the sterile cockpit rule, so the headset mike has to do double duty filtering out airplane noise and kids excited about arriving at Disneyland. Communication with SoCal approach and the tower was never a problem.
The CQ1 is visually similar to some other offerings, but one touch or a closer inspection reveal the enormous differences. The differences are even more obvious at first use. The frame is more robust and stays where you put it. The cables are high quality with a Kevlar core. The controls are simply amazing! No more finding the tiny sweet spot in the volume knob that allows both speakers to work simultaneously! The mike is fundamental game changer with its noise cancelling capability. It stays EXACTLY where you put it with no spring back. There?s no auxiliary input, that feature is easily addressed by simple adapters and most intercoms and audio panels have wired and / or Bluetooth inputs anyway.
My fear is that this post reads like an advertisement. It?s not; I am however excited about the product and what its creators have done. I like it well enough that we have bought a second CQ1 for my pilot wife. I own two Bose A-20s because they?re quality, they fit the kids, and they will for years. I own a Lightspeed Zulu II which was an expensive failed experiment. Quality is good, but they interfere with sunglasses and hats, and they clamp my dainty ears; a fault they share with the Bose. I have primarily flown with the Quiet Technologies headset because it?s more comfortable than anything that clamps my head. It was also fickle, temperamental, and of mediocre quality. I have tested all 4 headsets back-to-back and Tanya and Scott?s CQ1 offering is the best, hands down.
I find in-the-ear headsets quieter than ANR in RVs, especially when glasses and hats are in the mix to break the seal with my head. I can hear the cancelling feature in ANR headsets and find it tiring and a bit nauseating. There was a post here recently about that, so I'm not the only one. Ear tips and ear plugs are a very personal thing. They also have to be inserted correctly to work. I roll my own using Howard Leight earplugs because they work well for me. I think Card Machine Works have a few other suggestions. I use the same basic plugs for flying, motorcycling, woodworking, machine work, and even at my day job at times. It?s on my list to make a video describing my process. Now that I?ve stated that publicly, maybe I?ll follow through.
Here's a link to their website. There is much more detailed information there. https://cqheadset.com/
Here's a photo:
Here's a photo of one on my ugly mug. I've since refined the positioning on my head.