czechsix
Well Known Member
The wing wiring harness that came with the -14 kit doesn't use shielded wire for the strobes & nav lights as specified by AeroLED's recommended diagrams. Eliminating the shielded wire saves a bit of cost and weight, but for those of you flying who used Van's harnesses, do you have any strobe noise (through the headset)?
Interestingly, Van's tailcone harness does use shielded wiring for the tail nav/strobe light. I see there's a piece of black wire (a couple feet long) connected to the shield braid. Does that wire get terminated to the airframe, or the Suntail light mounting screw? I don't see that part specified in the tailcone plans.
Thanks,
Interestingly, Van's tailcone harness does use shielded wiring for the tail nav/strobe light. I see there's a piece of black wire (a couple feet long) connected to the shield braid. Does that wire get terminated to the airframe, or the Suntail light mounting screw? I don't see that part specified in the tailcone plans.
Thanks,