Hey All
About 2.5 years ago I bought an unfinished (about the same stage as a Quick Build )project RV-6 from New Jersey USA and shipped it Down Under.
With family,work and everything else that gets in the way I have been working away at a moderate pace.
I have done all the SB's and replace the 6 Vertical Stab/Rudder with an 8.
Lots of little mods here and there make building a little slower.
I'd like to share this one in particular,so i made a little video.
I made my slider canopy open fully using RV8 tracks
https://www.youtube.com/watch?v=hEV_s6QEqkE
Cheers
Joe
RV-6 Superior XP-IO320 Catto 3 blade.
About 2.5 years ago I bought an unfinished (about the same stage as a Quick Build )project RV-6 from New Jersey USA and shipped it Down Under.
With family,work and everything else that gets in the way I have been working away at a moderate pace.
I have done all the SB's and replace the 6 Vertical Stab/Rudder with an 8.
Lots of little mods here and there make building a little slower.
I'd like to share this one in particular,so i made a little video.
I made my slider canopy open fully using RV8 tracks
https://www.youtube.com/watch?v=hEV_s6QEqkE
Cheers
Joe
RV-6 Superior XP-IO320 Catto 3 blade.