I bought an airplane with Dynon D-10A and Autopilot with a AP74. So that I wouldn't have to change platforms I also installed a used D180 and HS34 system I bought from a guy off of VAF.
I called today and asked Tech Support what the ARINC configuration for the GNS430 should be an the Tech said there was no information on how to set up the GNS430 nor do they publish anything. The tech told me I would just have to figure out how to set up the 430 myself and they couldn't / wouldn't help me. I looked in the Skyview manual and it tells you exactly how to set up the 430 so it will talk to the Dynon.
So does anybody know how to set the ARINC labels in the 430 so it will talk to my D180. Apparently Dynon doesn't have a clue.............
I called today and asked Tech Support what the ARINC configuration for the GNS430 should be an the Tech said there was no information on how to set up the GNS430 nor do they publish anything. The tech told me I would just have to figure out how to set up the 430 myself and they couldn't / wouldn't help me. I looked in the Skyview manual and it tells you exactly how to set up the 430 so it will talk to the Dynon.
So does anybody know how to set the ARINC labels in the 430 so it will talk to my D180. Apparently Dynon doesn't have a clue.............