Aero_Octaveus
Well Known Member
Has anyone had issues with the fitment of the Bulkhead Recess F-601K-1.
When I cleco mine onto the bulkhead, the top most #30 holes each side (and the one lower down #40 holes) do not want to align. The recess width seems to be 1/8" narrow overall. Is it possible that maybe Van's didn't get the bend 100% perfect on this one?
If I force the cleco's then the corners really "dog ear" up and there is considerable stress on those corners.
When I cleco mine onto the bulkhead, the top most #30 holes each side (and the one lower down #40 holes) do not want to align. The recess width seems to be 1/8" narrow overall. Is it possible that maybe Van's didn't get the bend 100% perfect on this one?
If I force the cleco's then the corners really "dog ear" up and there is considerable stress on those corners.