What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

G3X support boxes

Get ready...

I wish there was a standard...but there isn't.

For my system, I cut a "clearance" hole in the sub panel and reinforced it with aluminum angle, as specified by Vans. In this hole I built a rack that will hold the Dual EFII ECUs, GTR20 com, GAD29, and GEA24, and PLX F/R Amp.

I am in the process of wiring the GEA24 now...there are LOTS of wires...
 
rocketman1988 said:
I wish there was a standard...but there isn't.

For my system, I cut a "clearance" hole in the sub panel and reinforced it with aluminum angle, as specified by Vans. In this hole I built a rack that will hold the Dual EFII ECUs, GTR20 com, GAD29, and GEA24, and PLX F/R Amp.

I am in the process of wiring the GEA24 now...there are LOTS of wires...
Click to expand...

That sounds like an interesting approach. Do you have a pic? I am currently working on my panel/sub-panel.

Larry
 
Behind G3X pnl

The documentation for the RV-12 G3X install would give you a good in site of how they install the equiptment.
 
Pix

I can?t get to the shop right now but if you look up mykitlog.com and search for Sunman , Indiana, you can find pictures of it...
 
You must log in or register to reply here.
Back
Top