Veetail88
Well Known Member
Folks,
I have an AFS 4500 and the standard red cube fuel sender that has been acting up. The GPH readings have been irregular and on my last flight, it dropped to zero and stayed there for a while, then began reading correctly again. Is this a common failure mode of the cube or am I likely to have a connection problem somewhere. I went through all the wiring yesterday and couldn't find any obvious problem.
I have an AFS 4500 and the standard red cube fuel sender that has been acting up. The GPH readings have been irregular and on my last flight, it dropped to zero and stayed there for a while, then began reading correctly again. Is this a common failure mode of the cube or am I likely to have a connection problem somewhere. I went through all the wiring yesterday and couldn't find any obvious problem.