Retro fitting RV9A with G3X touch, I noted in the G3X installation manual section
"26.5.13 Pressure Inputs
All pressure inputs are capable of accepting input voltages of up to 40 Vdc. The oil pressure input can also accommodate resistive and constant current source sensors"
It appears that the oil pressure sensor I have is a resistive type as is the fuel pressure gauge, I am unable to find where I can configure the Oil pressure gauge to be a RESISTIVE type, I am using the GEA24 with a GDU450.
Thanks in advance for any help
"26.5.13 Pressure Inputs
All pressure inputs are capable of accepting input voltages of up to 40 Vdc. The oil pressure input can also accommodate resistive and constant current source sensors"
It appears that the oil pressure sensor I have is a resistive type as is the fuel pressure gauge, I am unable to find where I can configure the Oil pressure gauge to be a RESISTIVE type, I am using the GEA24 with a GDU450.
Thanks in advance for any help