In the horizontal stab attach bar, page 10-04, I'm having math trouble.
The top left figure says the piece is 5 and 13/16 wide. The bottom says it's the sum of 1 and 3/16, 1 and 1/4, 1, 1 and 1/4, and 1 and 3/16. I add those up and get 5 and 14/16.
Millimeters don't work for me either. Top view says 147.6 mm. Bottom says sum of 29.8, 31.8, 25.3, 31.8 and 29.8. My calculator says that's 148.5.
What mistake did I make? Is it the difference because the back side is angled, and the top is measuring the back while the bottom is measuring the front?
The top left figure says the piece is 5 and 13/16 wide. The bottom says it's the sum of 1 and 3/16, 1 and 1/4, 1, 1 and 1/4, and 1 and 3/16. I add those up and get 5 and 14/16.
Millimeters don't work for me either. Top view says 147.6 mm. Bottom says sum of 29.8, 31.8, 25.3, 31.8 and 29.8. My calculator says that's 148.5.
What mistake did I make? Is it the difference because the back side is angled, and the top is measuring the back while the bottom is measuring the front?