What I would do:
- Move the airspeed and altimeter steam gauges to above the radio stack, side by side, airspeed on left.
- Move the left 10? SkyView display further to the left.
- Move the radio stack to the left, just on the right side of the left display.
- Add the SKyView knob module under the left display, or under the intercom module (the best money you will spend on the panel)
- Replace the 7? right display with anther 10? SkyView display, just to the right of the radio stack. Normal use for the right display tends to be engine monitoring and the map ?Scratch Pad?. This is the map that I use to look out for weather, get weather reports, look for TFRs etc. It is also big enough to be the primary display for the pilot, and makes flying in the right seat easy.
This is about what I have in the RV-10 (second panel integration) and it works well. If I changed anything, I?d leave out the altimeter (but keep the airspeed). I find I never use it. I do use the round airspeed for take off and landing.
Carl