__________________
Larry Anderson
Indianapolis
RV-8 N88XT Flying
RV-10 QB N38LA Flying
Helicopter Instructor Pilot
Standardization I.P.
Instrument Examiner
U.S. Army Retired
EMS Pilot for LifeLine
At IU Health
It's an iPad tray. It lifts up above the throttle.
It will be interesting to hear Geoff's comments on how well the new design works.. I know he just made his first cross country with the new panel this weekend. I haven't had a chance to talk with him since he's got back.
Bob is correct. It is a quick up and down Tablet/IPAD tray. It works very good. After 5hrs of travel l really like it. l had one in the plane with the other armrest that l used for 6 years. It worked great also.
l will post some pictures later.
Here are some pictures of the tablet/IPad tray. It's a quick up and a quick down.
I only use this once aircraft is at altitude and in cruise. I had one very similar attached to the original style armrest. This is made on our HP MJF 3D printer. The material is PA12 nylon. Very light and strong
Jeff, I bought your carbon instrument panel along with the center console. I will be putting the center console in this summer and was wondering if there is room to put a Dynon Autopilot/Comm control module behind the throttle?
When will the storage option be available for purchase? Inquiring minds want to know.
__________________
Rudder - Complete
Horizontal Stabilizer - Complete
Vertical Stabilizer - Complete
Elevators - In the Works!
Cabin Cover - Complete (wheewww!)
Dues Paid Through 2018
Linear Mode
