Part of airplane factory clean up is to go back through the plans and bag up like hardware that will be used in final assembly. For example the wing bolts, washers and nuts all together an labeled in a bag.
I'm looking at the wing assembly attachment section and it has me put about 50 K1100-8 at the fuselage wing roots. Well I have about 14 of them, so I either inadvertently installed 8s somewhere instead of 6s or I didn't get enough. Don't think that's the case because I look at the inventory list and the only K1100-8 are in a bag with 6's and there are only like 25 or so of them...
Curious if anyone with the QB ran into this or did I lose them somewhere?
I'm looking at the wing assembly attachment section and it has me put about 50 K1100-8 at the fuselage wing roots. Well I have about 14 of them, so I either inadvertently installed 8s somewhere instead of 6s or I didn't get enough. Don't think that's the case because I look at the inventory list and the only K1100-8 are in a bag with 6's and there are only like 25 or so of them...
Curious if anyone with the QB ran into this or did I lose them somewhere?