Page 10-13, step 2. Use a reduced diameter female die on the J-Channel of the bottom skin.
The holes along the skin edge that are about 1/2 inch away from the J-Channel on the skin itself, or the stiffeners that connect to it? It seems like the wording wants the skin edge holes but I don't see why to use a reduced diameter. There is lots of room. What am i missing?
The holes along the skin edge that are about 1/2 inch away from the J-Channel on the skin itself, or the stiffeners that connect to it? It seems like the wording wants the skin edge holes but I don't see why to use a reduced diameter. There is lots of room. What am i missing?