wirejock
Well Known Member
I got the rudder rigged but there's a dimension I can't find. Vans manual says to rig it so the horizontal gap between the counterbalance and VS skin is equal. Got that. Measures. .170" along the gap, both sides.
I can't find a dimension for the other gap between the forward end of the counterbalance and tje VS skin and fiberglass tip . Currently .125" to the metal edge. I can tighten it or open it by equal adjustment of all three bearings, but what should it measure?
I can't adjust the deflection till that gap is set.
Anyone?
I can't find a dimension for the other gap between the forward end of the counterbalance and tje VS skin and fiberglass tip . Currently .125" to the metal edge. I can tighten it or open it by equal adjustment of all three bearings, but what should it measure?
I can't adjust the deflection till that gap is set.
Anyone?