I'm starting to get to procedures that involve bolts and nuts instead of rivets. Seems like progress. I tried to torque a few AN3 bolts and MS21042-3 nuts, but I think I probably over torqued them. I didn't get an indication from the wrench that I hit the torque value. I tried to back off the nut, but it just spins and won't come off the bolt. Has this happened to others? I'm not sure how I'm going to get the nut off right now, but will obviously junk the bolt and the nut when I do get them apart.
I did order a nice CDI torque wrench tonight, so I'm hopeful it will be easier to use than the POS Harbor Freight one that's going in the garbage.
Jeff
I did order a nice CDI torque wrench tonight, so I'm hopeful it will be easier to use than the POS Harbor Freight one that's going in the garbage.
Jeff