ron sterba
Well Known Member
Iam Following my first condition inspection form from Vans website on my RV9A and pulling off the items from the form to make my own condition inspection list. I question that I have to check the torque on all my AN-3 & AN-4 nuts. I used torque seal on every nut. Not one has MOVED! Every nut is right where I left it torqued to the bolt and surface it holds. Is there such a tool as a open end-wrench that is a torque wrench for ONLY AN3 & AN4 nuts? I know NASA has many and even though I helped pay for them I don?t get to use them or even look at the toolbox! I went to Aircraft Spruce and they have torque SCREWDRIVERS, COOL I thought, I?ll just use a socket on the end instead of a bit. $250 bucks hello! I think that every EAA chapter should own one. Give me your thoughts.
Thanks
Ron in Oregon
RV9A.
Thanks
Ron in Oregon
RV9A.