I finished my overhead console a couple of months ago. Have received a lot of help from others, and was pleased with my finished product. Thanks for all the help and advice along the way.
Access panels and switch plate are veneered with amboyna burl (off of ebay). I intend on doing the same to panel inserts. Had a disaster first run with spray adhesive, was finally successful bonding veneer with G-flex epoxy. And found that my wife's food sealer is great for vacuum veneering. Finish is a 2k clear, spraymax.
Paint is Sherwin-Williams JetFlex Solvent-Based Polyurethane Enamel
L09027 - Blue Black, satin. Over epoxy resin and micro, some fiberglass to cover the 3/4" flex conduit in the anterior groove adjacent to the windscreen. I extended the Aerosports console to hide the conduit.
Various LED bolt lights, map lights, and mostly rocker switches that have LED indicators on them. A few bump outs to help position things.
Lots and lots of sanding and filling, but in the end I enjoyed it and the final result.