What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Rollbar Tap Fluid

JDA_BTR

Well Known Member
About to drill #36 and tap 6-32 the rear window holes into the rollbar. What tap fluid is safe or recommended for this process?
 
I used Boelube and went very slowly with the tap (by hand of course). I would only cut a turn or two then back it out and clean out the cuttings, add more lube and cut a couple more turns.
 
Make sure you use the revised plans for securing the small attach screws ( no thread locker as in revision 0).
 
Back
Top