I spoke to Luke at Classic aero about this when I was ordering my aviator seats and other things for my 6. He explained that due to inconsistency in the construction of 6s, their 7 glareshield trim could not be assumed to fit a 6. He suggested tracing the glareshield curvature of a 7 onto a piece of paper and measuring it against my 6.
In my case it wasn't even close. Suggest you find a 7 and conduct a similar comparison. If it matches I think you could order the glareshield trim with confidence. If not, theres a project for you. Or if your 6 is still under construction I imagine you could cut the glareshield to match the trim.
Last edited by Malndi : 06-22-2017 at 06:23 AM.