NorthernRV4
Well Known Member
Looking for some advice on a good small 1/4" drive inch-pound torque wrench for my project. I note some types indicate values as low at 20 in-lb but how accurate are they really at the complete bottom end of their scale??
Would a beam style like this one be preferred for aviation use where a 10-32 bolt requires 20-25 in-lb of torque (yes I know I need to add the break out torque of the nut but still a rather low value) I don't want to waste my money, or worse yet use a tool that isn't giving me the correct result.
Would a beam style like this one be preferred for aviation use where a 10-32 bolt requires 20-25 in-lb of torque (yes I know I need to add the break out torque of the nut but still a rather low value) I don't want to waste my money, or worse yet use a tool that isn't giving me the correct result.