istrumit
Well Known Member
Hey all. My -10 seems to have a linkage or governor setting that limits to RPM to about 2610.
Max rated HP on the engine is at 2700. Not that I am worried that 100 RPM is going to make much difference. But, I would like to just have the spec set correctly.
Problem is I can't seem to find a clear guide on how to adjust the max RPM.
I don't know if its linkage or governor or which.
Any advice would be appreciated.
Max rated HP on the engine is at 2700. Not that I am worried that 100 RPM is going to make much difference. But, I would like to just have the spec set correctly.
Problem is I can't seem to find a clear guide on how to adjust the max RPM.
I don't know if its linkage or governor or which.
Any advice would be appreciated.