Good day all!
I'm working on the elevators and I'm wondering if the group could clarify the proper position of the elevator skins with respect to the elevator counterbalance tip skins. The plans make it look like the lower skin tucks under the horn tip skin and the upper skin lays over top. It would seem to me that both should be underneath to keep the air flow from striking the overlapped joint head on.
Thanks!
I'm working on the elevators and I'm wondering if the group could clarify the proper position of the elevator skins with respect to the elevator counterbalance tip skins. The plans make it look like the lower skin tucks under the horn tip skin and the upper skin lays over top. It would seem to me that both should be underneath to keep the air flow from striking the overlapped joint head on.
Thanks!
Last edited: