Question for the brain trust:
Why do we sand and etch 4" from the base of the windshield on the F-1071 forward fuselage top skin?
The final layup calls for a 3.5" wide piece which covers about 2" or so on the top skin and 1.5" or so on the windshield using the 7" radius piece.
What am I missing and what covers that area?
Thanks
Ethan
Why do we sand and etch 4" from the base of the windshield on the F-1071 forward fuselage top skin?
The final layup calls for a 3.5" wide piece which covers about 2" or so on the top skin and 1.5" or so on the windshield using the 7" radius piece.
What am I missing and what covers that area?
Thanks
Ethan