cdeerinck
Well Known Member
I just got these in, and wanted to share. They are cheap, small, reconfigurable, and very useful. Prior to this, I was using a Fast-on distribution panel, and it was twice the size, and a complete mess. These look and function like a dream, and allow much better access and organization.
(Sorry about the upsidedown picture, I took this while inverted )
They are called Wago 221's and you can get them at Amazon here:
They hold wire from 12 to 26awg, and will carry 35 amps each. You can mix and match however you want. They securely hold a stripped wire, and you can remove a wire without cutting it. You can also do a circuit test without removing the wire.
I also bought the Wago 221-500's from Future Electronics, to mount them to a DIN rail.
(Sorry about the upsidedown picture, I took this while inverted )
They are called Wago 221's and you can get them at Amazon here:
They hold wire from 12 to 26awg, and will carry 35 amps each. You can mix and match however you want. They securely hold a stripped wire, and you can remove a wire without cutting it. You can also do a circuit test without removing the wire.
I also bought the Wago 221-500's from Future Electronics, to mount them to a DIN rail.