Guys,
I need to pull the timing gear for my Bendix mag out and don't want to take the accessory housing off.
Quick background it my motor is running great on the electric mag but when I test the mech mag it back fires and quits. I checked the timing of the mech mag and it is so far out I can't get it back as the required rotation of the mag for timing causes it to interfere with items in the center of the accessory case.
https://photos.google.com/photo/AF1QipMdiuLFU5MfnwBN_pIZvHVq5cRuEB_q5ML1bpp4
https://photos.google.com/photo/AF1QipP05SpIkNOf-F1lRrh_juU8P30JlGO4x-4pl60S
I am sure the gear is in the wrong position and needs to be pulled and rotated but it is in there pretty good and I am reluctant to try to pry it out.
Any suggestions?
Thanks
Mike
40644
I need to pull the timing gear for my Bendix mag out and don't want to take the accessory housing off.
Quick background it my motor is running great on the electric mag but when I test the mech mag it back fires and quits. I checked the timing of the mech mag and it is so far out I can't get it back as the required rotation of the mag for timing causes it to interfere with items in the center of the accessory case.
https://photos.google.com/photo/AF1QipMdiuLFU5MfnwBN_pIZvHVq5cRuEB_q5ML1bpp4
https://photos.google.com/photo/AF1QipP05SpIkNOf-F1lRrh_juU8P30JlGO4x-4pl60S
I am sure the gear is in the wrong position and needs to be pulled and rotated but it is in there pretty good and I am reluctant to try to pry it out.
Any suggestions?
Thanks
Mike
40644