Home > VansAirForceForums

- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

Old 03-12-2017, 07:16 PM
asw20c asw20c is offline
Join Date: Jun 2010
Location: Edgewood, NM
Posts: 156
Default Breaking the Edge

Pages 10-30 and 10-31 address the prep and installation of the tailcone's top side skins. What is noticeably absent from the plans is any mention of breaking the edges as was mentioned for the lower side skins as well as the top skin when you read ahead. Is that an oversight in the plans or is there a reason not to break the edges here? I thought this was supposed to be good standard of practice to do so.
Empennage Complete Except for Tips
Wings Underway
Reply With Quote
Old 03-12-2017, 08:48 PM
mturnerb mturnerb is offline
Join Date: Apr 2015
Location: Ponte Vedra, FL
Posts: 910

I used the edge roller to break the top skin before dimpling - then I test fit the skin and had a VERY slight gap at the edges when clecoed in place. I broke the edges a bit more with a seamer to make them nice and flat.
Turner Billingsley
RV-14A In Progress
N14VB Reserved

Last edited by mturnerb : 03-12-2017 at 08:53 PM.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 08:27 PM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.