Mike Raviv
Member
Gents,
I'm replacing some of the piano hinges in the cowling system with a Camloc fasteners based design. I have a bunch of Series 2700 pieces, the countersunk type. Are those adequate to work with the fiberglass? Or better yet, which type of stud is best for the job?
TNX and
BSTRGRDS
Mike
RV-7A 70434
4X - ORV (res)
I'm replacing some of the piano hinges in the cowling system with a Camloc fasteners based design. I have a bunch of Series 2700 pieces, the countersunk type. Are those adequate to work with the fiberglass? Or better yet, which type of stud is best for the job?
TNX and
BSTRGRDS
Mike
RV-7A 70434
4X - ORV (res)