KALEWIS
Well Known Member
Recv'd the adapter harness from VANS today, they are labeled RZxxx ( i think). The Old harness has co-pilot and pilot labels. anyone know which goes to which?
I have two sets of blu/wht wht and org/wht on the adapater harness along with :
The two green/white wires from co-pilot and pilot wire sets are tied together and pinned on #37 of the options.
There is also a black/white wire which i believe ties the two grounds together into 1 pin on the "options" harness. no mention of where that is pinned that either.
looked on the diagram but it looks to be for new skyview harness only, not the adapter for headsets (for those of us that have upgraded from D-180 harnesses to skyview)
questions is, has anyone else made this change yet.
no instructions on with the harness !!!
I have two sets of blu/wht wht and org/wht on the adapater harness along with :
The two green/white wires from co-pilot and pilot wire sets are tied together and pinned on #37 of the options.
There is also a black/white wire which i believe ties the two grounds together into 1 pin on the "options" harness. no mention of where that is pinned that either.
looked on the diagram but it looks to be for new skyview harness only, not the adapter for headsets (for those of us that have upgraded from D-180 harnesses to skyview)
questions is, has anyone else made this change yet.
no instructions on with the harness !!!
Last edited: