Hi Folks,
I am about finished gathering parts for my FP->CS conversion. I have an IO360M1B engine with a rear mounted governor. The question is, do I need to drain the oil before I take off the pad cover and install the governor? I would hate to find out that it is located below the oil level and have a lap full of 50 wt.
I am about finished gathering parts for my FP->CS conversion. I have an IO360M1B engine with a rear mounted governor. The question is, do I need to drain the oil before I take off the pad cover and install the governor? I would hate to find out that it is located below the oil level and have a lap full of 50 wt.