IowaRV9Dreamer
Well Known Member
I moved this from my accessory case thread...
I am preparing to build an O-320-E2A. It is an older engine I bought as parts. It came with a 2 piece camshaft, which I will probably use unless someone gives me a reason not to.
The cam has been ground/resurfaced by Aircraft Specialties Services (yellow tagged). The gear has been yellow tagged also by Central Cylinder Services.
My parts catalogs (both the current one, and a 1984 version that I have) only show the 1 piece cam. I found this picture in the Overhaul Manual:
I have the gear, slinger, and 2 lockplates. I will need to source the other parts.
Does anyone have an old (pre 1982, I think) Parts Catalog for the O-320 that would list the part numbers for all of these parts?
I am preparing to build an O-320-E2A. It is an older engine I bought as parts. It came with a 2 piece camshaft, which I will probably use unless someone gives me a reason not to.
The cam has been ground/resurfaced by Aircraft Specialties Services (yellow tagged). The gear has been yellow tagged also by Central Cylinder Services.
My parts catalogs (both the current one, and a 1984 version that I have) only show the 1 piece cam. I found this picture in the Overhaul Manual:
I have the gear, slinger, and 2 lockplates. I will need to source the other parts.
Does anyone have an old (pre 1982, I think) Parts Catalog for the O-320 that would list the part numbers for all of these parts?