Is this the part number you're using: John Deere AM101406?Does anyone have a resource for a connector that will fit the Deere VR and one that will connect to the existing regulator connector. thanks.
Hal;
I just bought a John Deere regulator as a 3rd string backup experiment.
if your stock RV-12 connector is in good shape, it will accept a standard 1/4" male spade connector, and the John Deere regulator will accept a standard 1/4" female spade connector. So, just make up a male-female connector jumper for each conductor (6 I believe) and it will work.
I don't even like John Deere parts on my John Deere mowers. I've got 5 acres of turf runway and another 3 acres in my lot. I've got a D110, L118, Z425, and a 3235B. Not really impressed with any of them.
Wouldn't even think about putting those parts on my airplane.
Jim
N37PK
Randy,
So can we get an update on your JD regulator experience to date? I also believe when you did the transfer you posted information about the modified plate to mount the JD regulator and the wiring adjust to work with this regulator.
Could you show this again or the link to the prior post? Thanks
Not sure but I think that might be the NAPA regulator not John Deere.
Also, http://www.vansairforce.com/community/showpost.php?p=1030520&postcount=47 pretty much supports your conclusion. 14.8 is just a bit close to the max of 15.0 for me ...
.....has anyone seen a failure of a Ducati that is mounted under the avionics bay as per current plans?
I sure don't want to be the one who does....
Nothing like electrical smoke in the cockpit to get your attention really fast.