View Single Post
Old 03-12-2017, 09:42 AM
wirejock's Avatar
wirejock wirejock is online now
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 2,977
Default Beringer brake system

Originally Posted by JDA_BTR View Post
I'm very tempted. I worry about deviating from the plans. Is there any modification needed in the gear legs or nose wheel with the kit changes laid out in the previous thread here? Or can I just buy the Beringer kit and bolt it in no sweat?

Also - where can I find how to connect the steel braided brake line in the Beringer kit? I know how to flare aluminum but that would be new for me....
I just finished the interior install on my 7a. I posted some tips to the 7 "Gotcha" page. Also more on my blog.
Larry Larson
Estes Park, CO
wirejock at yahoo dot com
Donated 12/01/2017. Plus a little extra.
RV-7A #73391, N511RV reserved (1,800+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
Reply With Quote