View Single Post
  #1  
Old 03-12-2017, 08:16 PM
asw20c asw20c is offline
 
Join Date: Jun 2010
Location: Edgewood, NM
Posts: 83
Default Breaking the Edge

Pages 10-30 and 10-31 address the prep and installation of the tailcone's top side skins. What is noticeably absent from the plans is any mention of breaking the edges as was mentioned for the lower side skins as well as the top skin when you read ahead. Is that an oversight in the plans or is there a reason not to break the edges here? I thought this was supposed to be good standard of practice to do so.
__________________
Empennage Complete Except for Tips
Wings Underway
Reply With Quote