View Single Post
  #18  
Old 09-21-2017, 07:57 PM
RFSchaller RFSchaller is offline
 
Join Date: Oct 2010
Location: Phoenix, AZ
Posts: 2,245
Default

Not directly related so forgive me if this is thread drift.

During my recent carburetor woes with the shop swapping my choke assemblies I came across a blog by a Brit ROTAX Repair shop that suggested adjusting the idle mixture screw to 2 turns from full clockwise as opposed to 1 1/2 turns gives a smoother idle. Has anybody tried this, and if so did it work?
Reply With Quote