View Single Post
  #2  
Old 04-02-2017, 09:43 AM
wirejock's Avatar
wirejock wirejock is online now
 
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 3,032
Default Jig

Quote:
Originally Posted by Cwood2000 View Post
On page 23-09 the plans call for a W-730 Bell Crank Jig to set the neutral position of the Bell Crank. I can't find one in any parts list nor a plan on making one. Did I miss something?
It wasn't in my 7a kit either. Buy two. They are handy to lock both wing/ailerons for storage.
__________________
Larry Larson
Estes Park, CO
http://wirejockrv7a.blogspot.com
wirejock at yahoo dot com
Donated 12/01/2017. Plus a little extra.
RV-7A #73391, N511RV reserved (1,800+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
Reply With Quote