Thread: Trim tab mount
View Single Post
  #3  
Old 11-07-2018, 05:51 AM
Desert Rat Desert Rat is offline
 
Join Date: Aug 2018
Location: 50-50 Wichita KS & Scottsdale AZ
Posts: 105
Default

Not familiar with the 14, but can you get to the back side of that area with a wrench? If so, you could drill off the nut plates and just use locking nuts on the backside.
__________________
Terry Shortt
AGI, CFI, CFII, MEI, A&P, Janitor
RV7 Empennage & Wing #72651
Reply With Quote