View Single Post
  #14  
Old 11-19-2019, 05:33 AM
WingsOnWheels WingsOnWheels is offline
 
Join Date: Mar 2009
Location: Plano, TX
Posts: 2,015
Default

I have a similar setup, except GTX-330 (non ES) and Dynon Skyview. The Dynon and GTX-330 are hooked together so the GTX gets altitude data from the dynon and the dynon gets status, squawk and mode S traffic from the 330. I tapped into those same serial cables for the Echo Multiplex cable. I adjusted the settings exactly per the instructions that came with the Mux cable. Everything works perfectly. I get no red of any kind on the PAPR unless I go out of range.

Could you have a defective multiplexer?

On the topic of uAvionix support, they were great. I submitted on on-line ticket and got a call not 2 minutes later. Sent me the Mux and answered a number of questions I had.
__________________
Colin P.
RV-6A #20603
Complete 5/10/19
PP SEL / A&P
I donate every year on my B-Day (in Dec), but donated early in Sep'19.

Last edited by WingsOnWheels : 11-19-2019 at 05:38 AM.
Reply With Quote