View Single Post
  #3  
Old 06-17-2019, 04:44 PM
MED MED is offline
 
Join Date: Jul 2015
Location: Aiken, SC
Posts: 441
Default

I raised the pallet off of the ground onto, I think, 4x4 inch blocks. Whatever will accommodate the legs of your engine hoist. I used a lever (actually, a mattock) to lift one side of the pallet at a time onto the blocks. Then, it was easy to position the hoist directly over the engine.
__________________
MED
140236
N435MD

Last edited by MED : 06-17-2019 at 04:47 PM.
Reply With Quote