View Single Post
  #3  
Old 06-22-2017, 07:19 AM
Malndi Malndi is offline
 
Join Date: Sep 2014
Location: Sydney Australia
Posts: 85
Default

Graham

I spoke to Luke at Classic aero about this when I was ordering my aviator seats and other things for my 6. He explained that due to inconsistency in the construction of 6s, their 7 glareshield trim could not be assumed to fit a 6. He suggested tracing the glareshield curvature of a 7 onto a piece of paper and measuring it against my 6.

In my case it wasn't even close. Suggest you find a 7 and conduct a similar comparison. If it matches I think you could order the glareshield trim with confidence. If not, theres a project for you. Or if your 6 is still under construction I imagine you could cut the glareshield to match the trim.

Mal

Last edited by Malndi : 06-22-2017 at 07:23 AM.
Reply With Quote