View Single Post
  #10  
Old 08-13-2017, 03:51 PM
jMINTj jMINTj is offline
 
Join Date: May 2017
Location: Madrid, Spain
Posts: 31
Default

Quote:
Originally Posted by jcarne View Post
Absolutely! There are tons of spots where the rivet is next to a flange and the longeron yolk will essentially give room for the flange. I just used it the other day when I riveted the main ribs to the rear spar on my wings. Virtually every major assembly I have used it on.

Also I just read your latest post, to avoid them markings by the rivet set most people just put a bit of blue painters tape on the part and peel it off after riveting. I highly recommend this when you start riveting on an exterior surface.
That's a great idea. I'll do that from now on. And I'll go ahead and grab one of the longeron yokes too!
__________________
v/r,
-MINT

RV-7A
https://jmintjrv7a.wordpress.com/
EMPENNAGE
VS Complete
Rudder & HS - In Progress!
Reply With Quote