View Single Post
  #9  
Old 01-12-2013, 08:48 AM
Mike Buckler Mike Buckler is offline
 
Join Date: Aug 2012
Location: Chatham Ont.
Posts: 34
Default Countersink Depth ?

Am I misunderstanding the countersink math - I flush set an 426AD3 rivet head and then added .010 in depth to the micro countersink (10 clicks), this was the method described in section 5 ?

How do most builders figure out the depth the countersink depth?
Is there an mathematical method I am not aware of?

First time builder

Thanks Mike
Reply With Quote