I am ready to do the final cuts on the canopy, but I can't find any mention of the placement of the rear cut. I know that the front gets cut with a 3/32" overhang, but the plans would seem to indicate that the aft cut simply follows the rear bow exactly. But THEN I noticed on "Mike"s RV-9" web site that he made the rear cut with a 1" overhang.
The plans also do not give a dimension for the side cuts, but again I see on Mike's site that he cut them 3/8" below the frames.
Anyone have some knowledge here? I'd be very appreciative. Thanks!
The plans also do not give a dimension for the side cuts, but again I see on Mike's site that he cut them 3/8" below the frames.
Anyone have some knowledge here? I'd be very appreciative. Thanks!