What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Need a measurement

Zuldarin

Well Known Member
Does anybody happen to have the measurements for the width of the tunnel cover and the height from the top of the tunnel cover to the bottom of the switch panel? I'm playing with the 3D tools in Solidworks and thought I would see if I could draw up some console plans.

Thanks,

Darin
 
Approx 5 3/4” width of tunnel just under panel. Approx 10 5/16 Tunnel top to bottom of standard panel. Approx 8 3/4” Tunnel top to bottom of standard Throttle Mixture Prop bracket....... on mine. Cheers from Western Australia
 
Back
Top