View Single Post
  #9  
Old 06-25-2018, 08:20 AM
JDA_BTR JDA_BTR is offline
 
Join Date: Dec 2013
Location: Baton Rouge, LA
Posts: 643
Default

And the follow up email from Beringer this morning:

“I double checked with the Headquarters and it seems that there is actually a torque for the bleeding screw, which is 15-17N.m (130-150 in.lb).


So the stamped torque value is correct.
__________________
Ser 104142, RV-14A
N1463
Final Assembly....
Reply With Quote