I'm getting ready to do the cowl split hinges. Van's instruction don't appear to be that explicit. I understand how the bottom hinge is riveted on, but when it comes to riveting the top hinge in place I'm a little lost. I have the dark gray cowl so a bright light will not penetrate the fiberglass. My thought was to layout the rivet patterning the upper hinge and then still them and I could hopefully see the holes in the hinge half to drill from the outside of the cowl. When I called Van's they weren't much help in making me understand the process. If anyone has suggestions or pics I'd be extremely greatful
Thanks
Tom Clark
N646LC ready to take flight soon
The Villages, FL 32162
Thanks
Tom Clark
N646LC ready to take flight soon
The Villages, FL 32162
Last edited: