View Single Post
  #43  
Old 01-12-2018, 02:51 PM
Breezy Breezy is offline
 
Join Date: Nov 2011
Location: Okeana, Ohio
Posts: 67
Default

Quote:
Originally Posted by TShort View Post
Reviving an old thread ...

How did those of you who put the switch in the side of the throttle (as in the pic on the previous page) route wiring?

Considering placing the TO/GA switch in the throttle, and looking into ways to safely route the wires (DPST switch).

Thanks
I machined a slot in the throttle lever. Then ProSealed tubing in the slot as a conduit for wires. If needed the switch and wiring can be removed without quadrant dis-assembly.
__________________
Breezy
First offense RV-8; N594WR; 80594 (time served)
ECI TITAN IOX 360 A1A9N, G3X

Repeat Offender: 83137 (Flying 10/16)
N837DW; Superior IO 360; G3X Touch.
Exceptional Aircraft Award, Sun N Fun 2017; Best Homebuilt, Mid-Eastern Regional Fly-in 2017.

One More Time: 140359, -14 in process, IO-390 (Maybe)


KHAO (Hogan Field)
Reply With Quote